| Model |
NVR308PQ3BTY80LFA2 |
| 4CH POE NVR |
| Operating System |
Embedded LINUX |
| Video & Audio |
| Incoming Bandwidth |
80Mbps |
| IPC Input |
8CH*4K/5MP/3MP/2MP/960P/720P |
| IP Channel Resolution |
Main-Stream: up to 3840×2160Sub-Stream: D1 |
| Video Decoding |
H.265 /H.264 |
| Audio Decoding |
G.711,G.726 |
| Decoding Capability |
4CH 1080P@25fps |
| Recording & Playback |
| Recording mode |
Timing recording or alarm recording |
| Playback |
8CH synchronous playback |
| Playback Mode |
Search by time, calendar, event, channel |
| Backup Mode |
USB device/USB mobile hard disk |
| Other |
| Two-Way Audio |
Between client and IPC |
| Motion Detection |
Zones: 396(22*18), Sensitivity: 1~6 (level 6 is highest) |
| Snap Mode |
JPEG |
| S.M.A.R.T Technology |
Support skipping bad track of hard disk to reduce data loss |
| Storage |
| SATA |
1*SATA HDD |
| Capacity |
Up to 10 TB capacity for each HDD |
| POE |
| Standard |
IEEE 802.3AF |
| Interface |
8CH RJ-45 10/100 Mbps self-adaptive |
| Power |
≤68W (Each≤13W) |
| Network |
| Network Protocols |
TCP/IP,DHCP,IPv4,DNS,DDNS,NTP,RTSP,SMTP, UPnP™,HTTP,etc. |
| ONVIF |
Support “Cross-Segement Add” to add different netword segement ip camera |
| APP |
iPhone, Android |
| PC |
Support |
| Interface |
| Network Interface |
1pc RJ45 10M/100M self-adaptive Ethernet interface |
| USB Interface |
2pcs USB2.0 Interfaces |
| Video Output |
VGA: 1CH,1920×1080,1280×720 |
| POE Power |
HDMI:1CH,1920×1080,1280×720, 1.4a |
| Audio Output |
1CH, RCA(Linear,1KΩ) |
| Alarm |
N/A |
| General |
| Installation |
Desktop Installation |
| Power Supply |
DC52V 2.3A |
| Consumption |
≤ 7W(without HDD) |
| Working Temperature |
-10℃- [$add]55℃ |
| Working Humidity |
10%∼90% |
| Camera |
Plastic Dome *8PCS |
| Image Sensor |
1/3" 8MP low illumination CMOS sensor |
| Max. Image Resolution |
8MP(3840x2160)@20fps |
| Frame Rate |
Main stream: 8MP(3840x2160)@20fps,5MP (2880x1664)@25fps,4MP(2560x1440) @25fps,3MP(2304x1296) @25fps,2MP(1920x1080) @25fps, 720P(1280x720) @25fpsSub-stream: 704x576, 800x448, 640x480, 640x360, 352x288 |
| Video Compression |
H.265/H.264 |
| Video Bit Rate |
128Kbps-8192bps continuous adjustable |
| Character Overlay (OSD) |
Support channel name, date/time, bitrate, resolution, and 5-line character overlay. |
| Audio Compression |
G.711A/G.711U |
| Two-way Audio |
Support |
| Min. Illumination |
Color: 0.1 Lux @ (F1.6, AGC ON),B/W: 0.01 Lux with IR |
| IR LEDs |
3pcs Hybrid Light LEDs |
| Day & Night Mode |
Hybrid Light Mode/Infrared Mode/Full Color Mode |
| Light Distance |
Infrared distance 25m, Full Color distance 20m |
| Lens |
[email protected] |
| WDR |
Digital WDR,>80db |
| S/N |
≥50db (AGC OFF) |
| DNR |
2D/3D DNR |
| Image Settings |
Basic: Brightness,contrast,saturation,sharpness,mirror,flip |
|
Advanced: Anti-flicker,BLC,HLC,scene,exposure time,AGC,white balance |
| Detection |
AI human detection, motion detection |
| Alarm Linkage |
Alarm triggering actions such as FTP upload, send message, audio alerts, email notifications, and light activation. |
| Ethernet Interface |
1 RJ45 10M/100M self-adaptive Ethernet port |
| Networking Protocol |
ONVIF,P2P,HTTP,TCP/IP,IPv4,RTSP,UDP,NTP,DHCP,DNS,GB28281 |
| Web Access |
Supports IE6.0 and above browsers, Free plug-in |
| Mobile |
Support IOS, Android |
| Power Supply |
DC 12V/POE |
| Type |
Plastic Dome Camera |
| Power Consumption |
Max 6W |
| Working Humidity |
10%-95% (Non-condensing) |
| Working Temperature |
-10°C to [$add]50°C |
| Package |
| 8CH TUYA POE NVR *1PC |
| 8MP Smart TUYA Hybrid Light Plastic Dome POE IP Camera * 8PCS |
| 52V 2.3A Power Adaptor * 1PC |
| 1M Network Cable * 1PC |
| 20M Network Cable * 8PCS |